MIL-DTL-26482 Series 1 Type Connectors

• MIL-26482 Series 1 Catalog (8.9 MB)

MIL-DTL-26482 Series 1 Style Accessories

MIL-DTL-26482 Series 1 Series Catalog

• MIL-26482 Series 1 Style Catalog (8.9 MB)

MIL-DTL-26482 Series 1 Specifications

• MIL-DTL-26482 Series 1 Style Specifications
• MIL-DTL-26482 Series 1 Style Contact Arrangements
• MIL-DTL-26482 Series 1 Style Contact Specifications
• MIL-DTL-26482 Series 1 Style Materials & RoHS Finishes

Description

This MS3116 type plug is compatible with all MIL-DTL-26482 Series 1 receptacles. It features an integrated wire sealing splash-proof backshell, while cable clamps provide necessary cable strain relief. Always use a protective cover when plug is disconnected to protect contacts from environmental contaminants and impact.

Cross-Reference & Compatibility

Description

The HM08 right angle plug is compatible with all MIL-26482 receptacles and features a 90° angled backshell, making it ideal for coupling in tight or difficult spaces. The 90° elbow also provides simple cable management. The integrated wire sealing splash-proof backshell provides environmental protection, while a cable clamp provides necessary cable strain relief.

Compatibility

Description

The MS3110 type wall mount receptacle has a standard four-hole flange for mounting on the front or rear of a panel. The integrated wire sealing splash-proof backshell provides environmental sealing and strain relief protection. Covers are recommended to protect the contacts from damage.

Cross-Reference & Compatibility

Description

The HM02 (MS3112 type) box mount receptacle offers a low-profile rear design without accessory threads, permitting it to be mounted in confined spaces. A gasket is recommended to seal the mounting location.

Cross-Reference & Compatibility

Description

The MS3114 type jam nut receptacle provides increased environmental protection due to its single mounting hole. An integrated silicone O-ring offers additional sealing while the integrated wire sealing splash-proof backshell provides environmental sealing and strain relief.

Cross-Reference & Compatibility

Description

The box mount type jam nut receptacle features a low-profile rear for installation in confined spaces. With just a single mounting hole, the jam nut is best for environmental protection. An integrated silicone O-ring offers additional sealing to the enclosure. For EMI protection, add a conductive O-ring.

Cross-Reference & Compatibility

Description

This MS3114 style jam nut receptacle comes preloaded with PCB contacts for direct termination to flex circuits or PCB boards. Jam nuts are the preferred connector for PC tail applications, as they offer a single hole mount design with an integrated silicone O-ring for environmental sealing.

Cross-Reference & Compatibility

Description

The HM02 (MS3112 type) box mount receptacle pre-filled with PC tail contacts offers a low-profile rear design without accessory threads, permitting it to be mounted in confined spaces. This is often ideal for PC board mount applications with tight design tolerances. A gasket is recommended to seal the mounting location.

Cross-Reference & Compatibility

Description

MS3111 type in-line or cable mount receptacles are ideal for extension cord applications. A reduced flange with rounded corners protects the connector from impact when the attached cable is dragged or dropped. The integrated wire sealing splash-proof backshell provides environmental protection and cable strain relief. A dust cover is recommended to seal and protect the contacts from damage.

Cross-Reference & Compatibility

Description

This unique connector is designed with receptacles on both sides of the shell in order to pass a signal through bulkheads or panels. It is compatible with MS3111 cable plugs. The long side of the shell features socket contacts, the short side pin contacts. A mounting bracket and gasket are recommended.

Compatibility

Description

Hermetic box mount receptacles are made with high-strength carbon steel shells and glass inserts to create a true airtight seal for MIL-26482 applications requiring the best in environmental protection. A low-profile rear design allows them to be mounted in cramped enclosures. A gasket and mounting bracket with sealing screws are recommended to help maintain a hermetic seal.

Compatibility

Description

MIL-26482 compatible hermetic jam nut receptacles are preferred for hermetic applications because of their a single-hole mount design and an integrated silicone O-ring to seal the installation. A cover is recommended to keep the contacts clean and dry.

Compatibility

Description

The MIL-26482 compatible solder mount hermetic receptacle comes with a reduced flange designed for mounting to a panel. The smaller footprint permits the connector to be installed in high densities or on probes or sensors. A dust cover is recommended for contact protection.

Compatibility

Description

These MIL-DTL-26482 Series 1 style backshells provide strain relief from cable tension, environmental sealing, and 360° shield termination hardware. They offer the best in connector protection, with complete EMI/RFI and environmental protection for all mission-critical designs.

Compatibility

Description

MIL-26482 style connectors should always be paired with protective covers to environmentally seal and protect the contacts from impact or damage. Covers also keep dirt and debris from the coupling mechanism, ensuring reliable mating every time.

Compatibility

Description

Dummy receptacles prevent operator injury or connector damage by providing a safe place to stow and organize unused cables. Protective covers are recommended to always keep stowage receptacles clean and dry. Compatible with all MIL-26482 connectors.

RoHS Compliant Finishes Available

Review alternate MIL-DTL-26482 Series 1 RoHS Finish & Materials options available to meet your application requirements for color, temperature, and corrosion-resistance.

Compatibility

Description

These mounting gaskets are sized to fit MIL-26482 mil-spec connectors and will seal the mounting space between receptacles and a panel to maintain the environmental integrity of an enclosure. They may be used in either rear or front mount receptacle installations.

Compatibility

Description

Mounting brackets add strength to mounting panels. The captive stainless steel locking nuts prevent loose fasteners from falling into susceptible areas, which may cause equipment failure. Optional sealing screws with O-rings will effectively seal the mounting holes on your enclosure from water ingress. Compatible with all MIL-26482 connectors.

Compatibility

Description

The H900 soldering station kit provides a complete solution for professionally terminating solder contacts to stranded or solid core wire. Compatible for terminating all MIL-26482 Series 1 style connectors.

Compatibility